Levelone WCS-2060 Bedienungsanleitung PDF herunterladen (Seite 48)

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.

Condition LED color

Loading system after power on Steady red

During booting procedure Steady green, blue and red

Detecting and setting network Steady green and blue. Blink red till IP address is

confirmed

After network is setup (system up) Blink green every second and steady red

During the upgrade firmware process Blink green every second and fast blink red

Enable audio Steady blue. Disable audio will turn off blue LED.

Reset and restore

There is a button in the back side of the Network Camera. It is used to reset the system or restore

the factory default settings.

RESET: Click on the button.

RESTORE:

1. Press on the button continuously.

2. Wait for all LED blink fast.

3. Free the button.

Restoring the factory defaults will erase any previous settings.

B. URL commands of the Network Camera

For some customers who already have their own web site or web control application, the Network

Camera can be easily integrated through convenient URLs. This section lists the commands in

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 74 75

Keine Kommentare

Levelone WCS-2060 Bedienungsanleitung Seite 48