LevelOne Router WBR-3600 Bedienungsanleitung PDF herunterladen (Seite 16)

If you can't connect

If the WBR-3600 Router does not respond, check the following:

• The WBR-3600 Router is properly installed, LAN connection is OK, and it is

powered ON. You can test the connection by using the "Ping" command:

• Open the MS-DOS window or command prompt window.

• Enter the command:

ping 192.168.0.1

If no response is received, either the connection is not working, or your PC's

IP address is not compatible with the WBR-3600 Router's IP Address. (See

next item.)

• If your PC is using a fixed IP Address, its IP Address must be within the range

192.168.0.2 to 192.168.0.254 to be compatible with the WBR-3600 Router's

default IP Address of 192.168.0.1. Also, the Network Mask must be set to

255.255.255.0. See Chapter 4 - PC Configuration for details on checking your

PC's TCP/IP settings.

• Ensure that your PC and the WBR-3600 Router are on the same network

segment. (If you don't have a router, this must be the case.)

• Ensure you are using the wired LAN interface. The Wireless interface can only be

used if its configuration matches your PC's wireless settings.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 103 104

Keine Kommentare

LevelOne Router WBR-3600 Bedienungsanleitung Seite 16