LevelOne GSW-2600TXM Bedienungsanleitung PDF herunterladen (Seite 140)

140

Parameter Default Description

Area ID¹ A 32-bit integer uniquely identifying an OSPF protocol

broadcast area. This identifier can be in the form of an IP

address or integer. Each port on the switch can be configured

to represent one OSPF area.

ID 0.0.0.0 is used for the OSPF backbone.

Router Priority 1 The priority used when selecting the designated router and

designated backup router.

Range: 0-255; Disable election: 0

Transit Delay 1 second The estimated number of seconds it takes to transmit a link

state update packet over this interface.

Range: 0-3600 seconds

Retransmit

Interval

seconds

The number of seconds between retransmitting link-state

advertisements to router adjacencies on this interface. This

value is also used when retransmitting database descriptions

and link-state request packets.

Range: 0-3600 seconds

Hello

Interval²

seconds

The interval, in seconds, between sending Hello packets out

the router interface.

Range: 1-65535 seconds

Dead

Interval²

seconds

The number of seconds that a router’s Hello packets have not

been seen before its neighbors declare the router down. This

should be a multiple of the Hello interval.

Range: 1-65535 seconds

1. The Area ID is used to specify a group of contiguous networks and hosts. OSPF

protocol broadcast messages are restricted by area to limit their impact on network

performance.

2. This value must be the same for all routers attached to a common network.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 199 200

Keine Kommentare

LevelOne GSW-2600TXM Bedienungsanleitung Seite 140