LevelOne GTL-5280 Bedienungsanleitung PDF herunterladen (Seite 148)

140

Parameter description:

 Port :

The Port coulmn shows the list of ports for which you can configure GARP settings. There

are 2 types configuration settings which can be configured on per port bases.

 Timer Values

 Applicantion

 Attribute Type

 GARP Applicant

 Timer Values :

To set the GARP join timer, leave timer and .leave all timers, units is Micro-second.

Three different timers can be configured on this page:

Join Timer :The default value for Join timer is 200ms.

Leave Timer : The range of values for Leave Time is 600-1000ms. The default value

for Leave Timer is 600ms.

Leave All Timer : The default value for Leave All Timer is 10000ms

 Application :

Currently only supported application is GVRP.

 Attribute Type :

Currently only supported Attribute Type is VLAN.

 GARP Applicant

This configuration is used to configure the Applicant state machine behaviour for GARP on

a perticular port locally.

 normal-participant: In this mode the Applicant state machine will operate normally in

GARP protocol exchanges.

 non-participant: In this mode the Applicant state machine will not participate in the

protocol operation.

The default configuration is normal participant.

 Buttons:

Apply – Click to Apply changes.

Reset- Click to undo any changes made locally and revert to previously Saved

values.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 263 264

Keine Kommentare

LevelOne GTL-5280 Bedienungsanleitung Seite 148