LevelOne NVR-1204 Installationsanleitung PDF herunterladen (Seite 92)

Network Video Recorder Administrator’s Manual

Configure Network Settings

There are two network interface cards in NVR.

Either of these cards can be supported by the built-in DHCP server feature, which enables

NVR to assign IP addresses to cameras via LAN1 or LAN2 port without another DHCP on

router.

By default, LAN1 card uses a fixed IP address 192.168.0.10, while LAN2 is in DHCP client

mode. It is suggested that you connect LAN1 to LAN and connect LAN2 to WAN.

Current IP Configurations

Go to Setup page  Network tab.

IP Settings

On Network tab, click “Network Connection” then select the interface card that you wish to

set up. After setting up, please click “Save” on the bottom right side to save the settings.

LAN1 Configuration LAN2 Configuration

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 135 136

Keine Kommentare

LevelOne NVR-1204 Installationsanleitung Seite 92